IFRS and IAS Study Guides

Study the accounting treatment, follow a worked example, and check your understanding. Each guide covers scope, measurement, application and common reporting considerations.

IAS 2 · Inventories

Include purchase and conversion costs and other costs that bring stock to its present location and condition. Measure at the lower of cost and net realisable value (NRV). Use specific identification for appropriate distinct items and FIFO or weighted average for ordinarily interchangeable stock.

Scope

Use IAS 2 for goods held for sale, goods being produced for sale, and materials or supplies consumed in production or service delivery. Financial instruments and certain agricultural items are addressed separately.

Build the cost

Start with price net of rebates. Add non-recoverable taxes, inbound freight and other costs needed to bring the inventory to its current condition and location. For production, include direct labour and allocate fixed production overhead using normal capacity. Expense abnormal waste, selling costs and ordinary storage unless storage is necessary for a further production stage.

Choose a cost formula

Use specific identification for distinct items. Use FIFO or weighted average for interchangeable items and apply the same formula to inventory of similar nature and use.

Measure at close

Compare cost with estimated selling price less costs to complete and make the sale. Recognise a write-down when NRV falls below cost. If NRV recovers, reverse only up to the original write-down. Expense carrying cost when related revenue is recognised.

Report and check

Disclose measurement policies, cost formulas, material inventory balances by class, expense recognised and material write-downs and reversals. Retain count evidence and the support for selling price and selling-cost estimates.

Worked example

Coffee beans cost $700. Expected selling price is $660 and selling costs are $30. NRV is $630, so recognise a $70 write-down.

Dr inventory write-down expense $70 / Cr inventory or its valuation allowance $70. At a later close, if NRV rises from $630 to $680, reverse $50. The carrying amount cannot exceed original cost of $700.

Application point

NRV estimates what this business expects to realise.

Self-check

Another batch costs $900. It can sell for $875 and requires $35 of selling costs. What is the year-end carrying amount?

Show answer

NRV is $840 ($875 − $35). Carry inventory at $840 and recognise a $60 write-down.

Apply IAS 2 to a month-end inventory review

A distributor buys 100 units at $10 and 100 at $14. It sells 120 units. Under FIFO, cost of goods sold is $1,280 and the remaining 80 units cost $1,120. Under periodic weighted average, the cost is $12 per unit, so cost of goods sold is $1,440 and remaining inventory costs $960.

Under FIFO, the 80 units can sell for $13 each and cost $1 each to sell. Their net realisable value is $960. Record a $160 write-down by debiting inventory write-down expense and crediting inventory or its allowance. If net realisable value later rises to $1,040 while the units are still held, reverse $80 as a reduction of inventory expense.

What to check at work

Reconcile the inventory quantities to the count and investigate slow-moving stock. Document recent selling prices, costs to complete or sell, and the basis for grouping similar items where appropriate. Apply the cost formula consistently to inventories of similar nature and use.

Try it yourself

Using the same net realisable value, would periodic weighted average produce a write-down?

Show answer

No. The $960 remaining cost equals the $960 net realisable value.

IFRS Foundation · Standards Navigator

IAS 7 · Statement of Cash Flows

Separate operating, investing and financing cash flows. Use the direct or indirect method for operating cash flows. Keep noncash investing and financing transactions outside the cash flow statement and disclose them separately.

Scope and cash definition

Cash includes cash on hand and demand deposits. Cash equivalents are short-term, highly liquid investments held to meet near-term commitments, readily convertible into a known amount and exposed to insignificant value risk. A qualifying investment normally has three months or less to maturity when acquired.

Classify the flows

Operating covers the main revenue-producing activities. Investing generally includes purchases and sales of long-term assets and investments outside cash equivalents. Financing includes changes in contributed equity and borrowings. Transfers between cash and cash equivalents are excluded.

Prepare operating flows

The direct method shows major cash receipts and payments. The indirect method adjusts the applicable profit subtotal for noncash items, working-capital movements and items whose cash effects sit in investing or financing. New IAS 7 requirements associated with IFRS 18 change the indirect starting subtotal and interest and dividend classification when adopted.

Finish and disclose

Reconcile opening and closing cash and equivalents. Present exchange-rate effects on foreign-currency cash separately from cash flows. Disclose material noncash investing and financing transactions separately and explain changes in liabilities arising from financing activities.

Worked example

Customer cash receipts of $3,700 less operating payments of $1,600 give $2,100 operating cash flow. Equipment purchased for $4,800 is an investing outflow.

The café reports $2,100 operating cash inflow and $4,800 investing cash outflow. If it also raises $10,000 owner funding, financing cash inflow is $10,000 and total cash rises by $7,300, assuming no exchange effects or other flows.

Application point

Recognising revenue on credit creates no cash flow until collection.

Self-check

The café acquires an oven entirely by taking on a lease liability at commencement. What cash flow is recorded on that date?

Show answer

No cash moved at commencement. Disclose the noncash transaction separately and classify any later cash payments under the applicable requirements.

Build an indirect cash flow reconciliation

Assume an applicable starting profit subtotal of $18,000, no cash taxes or interest in this example, and no other operating adjustments. Depreciation was $3,000, operating receivables rose $2,500, inventory fell $1,000 and operating payables rose $500. Net operating cash flow is $20,000 ($18,000 + $3,000 − $2,500 + $1,000 + $500).

The receivables increase reduces cash relative to accrual profit. The inventory decrease and payables increase have the opposite effect in this simplified reconciliation. Equipment purchases of $8,000 go to investing and $5,000 of cash loan principal repayments go to financing. Opening cash of $10,000 reconciles to closing cash of $17,000 if there are no other cash flows or exchange effects.

What to check at work

Tie closing cash to the ledger and remove noncash movements from the working capital bridge. Once IFRS 18 applies, use operating profit or loss as the indirect-method starting point and check the revised interest and dividend classification requirements for the entity.

Try it yourself

Where does equipment recognised at lease commencement with no upfront cash payment appear?

Show answer

Keep the noncash acquisition out of the cash flow totals and disclose it separately as a noncash transaction.

IFRS Foundation · Standards Navigator

IAS 10 · Events after the Reporting Period

Consider events between the reporting date and when the statements are authorised for issue. Adjust for evidence of conditions that existed at the reporting date. Disclose material non-adjusting events and estimate their financial effect when possible.

Set the review window

Review favourable and unfavourable events from the reporting date through the date the statements are authorised for issue. Record who authorised them and when.

Decide whether to adjust

If later information confirms a condition already present at the reporting date, revise the affected balance and disclosures. A later settlement can confirm the amount of an existing obligation. If the condition arose later, keep the year-end amounts based on year-end facts.

Disclose material later events

For each material category of non-adjusting event, describe the event and estimate its financial effect if possible. If an estimate cannot be made, say so. Also update disclosures about year-end conditions when later information adds evidence.

Dividends and going concern

A dividend declared after the reporting date is generally not a liability at year-end. If management later intends to liquidate or cease trading, or has no realistic alternative, reassess the basis of preparation rather than treating the issue as an ordinary subsequent-event disclosure.

Worked example

A customer’s bankruptcy after year-end confirms severe financial difficulty already present at year-end. Reassess the year-end receivable.

A customer owed $4,000 at year-end. A bankruptcy before authorisation confirms financial distress that existed at year-end. If the updated year-end recoverable estimate is $900 and no allowance was recorded, recognise a $3,100 loss allowance, subject to the applicable receivables measurement rules.

Application point

A fire occurring after year-end generally reflects a new condition.

Self-check

A fire destroys a storage building two weeks after year-end. There was no related damage at year-end. The effect is material. What changes?

Show answer

Do not reduce the year-end building for a condition that arose later. Disclose the fire and estimate its financial effect if possible. Consider any implications for going concern separately.

Decide what a January event means for December

A customer owed $20,000 on December 31 and was already in severe financial difficulty. It enters bankruptcy in January before authorisation. Recovery is now estimated at $5,000. A $2,000 loss allowance was already booked and the new information confirms the year-end condition.

Increase the December allowance to $15,000. Debit impairment loss and credit loss allowance for the additional $13,000. If new damage from a January fire instead affects the company’s warehouse, keep the December warehouse amounts and disclose the nature and estimated financial effect if material, or state when that estimate cannot be made.

What to check at work

Keep a dated events log, including evidence of when the underlying condition arose. Record when and by whom the statements were authorised. If subsequent developments mean the going concern basis is no longer appropriate, reassess the basis of preparation.

Try it yourself

The board declares dividends after year-end. Do they create a liability at December 31?

Show answer

No. Consider the applicable disclosure for dividends declared before the statements are authorised.

IFRS Foundation · Standards Navigator

IAS 16 · Property, Plant and Equipment

Recognise an asset when future benefits are probable and cost is measurable reliably. Include directly attributable costs of preparing it for use. Subsequently use the cost or revaluation model for a class of assets. Depreciate significant components separately, beginning when available for use. Review useful life, residual value and depreciation method at least annually.

Scope and recognition

This guide covers tangible assets used in production, services, rental or administration over more than one period. Recognise an item when probable future benefits can be supported and cost can be measured reliably. Assess major component replacements and inspection costs separately and derecognise the part replaced. Routine repairs are generally expensed.

Initial measurement

Include the purchase price net of discounts, directly attributable costs of getting the asset ready, and an initial dismantling or restoration estimate when there is an obligation. Exclude staff training, opening costs and general overhead. Proceeds from selling items made before the asset is ready are not deducted from the asset cost.

Subsequent measurement

Choose cost less accumulated depreciation and impairment, or the revaluation model for an entire class where fair value can be measured reliably. Revalue often enough to avoid a material gap. Where applicable, revaluation gains generally go to other comprehensive income, with exceptions for reversals of earlier decreases.

Depreciation and disposal

Depreciate significant components separately from the date they are available for use. Allocate cost less residual value over useful life using a method that reflects consumption. Review method, life and residual value at least annually. On disposal, remove cost and accumulated depreciation and compare net proceeds with carrying amount.

Report and check

Disclose measurement bases, methods, useful lives or rates, and a carrying amount reconciliation by class. Retain acquisition, commissioning and disposal support.

Worked example

A $10,000 espresso machine requires $1,000 installation. With $1,000 residual value and five years of straight-line depreciation, record $2,000 expense in a full year. Carrying amount after that year is $9,000 under the cost model, assuming no impairment.

Initial cost is $11,000. Depreciable cost is $10,000 after residual value. A full year is $2,000. Dr depreciation expense and Cr accumulated depreciation $2,000. If sold the next day for $8,500 with no disposal costs, recognise a $500 loss against the $9,000 carrying amount.

Application point

Routine maintenance is typically expensed. Capitalised replacements need to meet recognition criteria.

Self-check

Equipment costs $12,000, including a separately identifiable $3,000 part lasting three years. The remainder lasts six years. What is annual straight-line depreciation with no residual value?

Show answer

The part costs $3,000 ÷ 3 = $1,000 per year. The rest costs $9,000 ÷ 6 = $1,500. Annual depreciation totals $2,500.

Capitalise, depreciate and dispose of equipment

A company pays $48,000 for a machine, $2,000 for necessary installation and $1,000 for operator training. Assume cash payment and no other costs. Debit equipment $50,000 and training expense $1,000, and credit cash $51,000. The machine is available for use on July 1. With no residual value and a five-year useful life, first-year depreciation through December is $5,000.

If sold after two full years of depreciation for $32,000 cash, carrying amount is $30,000. Debit cash $32,000 and accumulated depreciation $20,000. Credit equipment $50,000 and recognise a $2,000 gain on disposal. Depreciate through the disposal date in this example.

What to check at work

Tie costs to invoices and the available-for-use date to commissioning records. Review useful lives, residual values and depreciation methods at least at each financial year-end. Check whether significant components need separate depreciation.

Try it yourself

Does the company wait to depreciate the machine until its first customer order?

Show answer

No. Depreciation starts when the machine is available for use.

IFRS Foundation · Standards Navigator

IAS 21 · Effects of Changes in Foreign Exchange Rates

Determine the functional currency from the primary economic environment. Initially record a foreign-currency transaction at the transaction-date rate. Retranslate monetary balances at the closing rate. Exchange differences generally go to profit or loss, subject to specified exceptions.

Identify the functional currency

Start with the currency that mainly influences selling prices and labour, material and other operating costs. Funding and the currency in which operating receipts are retained give supporting evidence. An entity may present statements in a different currency.

Record and retranslate

Record foreign currency transactions using the spot rate on the transaction date. A reasonable average can approximate it when rates are stable. At reporting date, retranslate monetary items such as cash, open receivables and payables at the closing rate. Keep historical-cost nonmonetary items at the historic rate. For nonmonetary items at fair value, use the rate when fair value was measured.

Recognise the difference

Most transaction exchange differences go to profit or loss. Where a nonmonetary gain or loss goes to other comprehensive income, its currency component follows it. Qualifying net investment items and foreign operation translation can also affect other comprehensive income.

Translate a foreign operation

Generally translate assets and liabilities at the closing rate, income and expenses at transaction-date rates or an appropriate average, and resulting translation differences into other comprehensive income. Where currencies lack exchangeability, assess exchangeability and estimate an appropriate spot rate using the applicable requirements.

Worked example

An unpaid US$1,000 invoice was booked at CAD 1.35 per USD. At closing, the rate is 1.38. A Canadian-dollar functional currency entity increases the payable by CAD $30 and recognises the exchange loss in this example.

The US$1,000 payable increases from CAD $1,350 to $1,380. Dr FX loss $30 / Cr Accounts payable $30. If settled later at CAD 1.36 per US dollar, pay $1,360 and record a $20 gain from the last carrying amount.

Application point

A historical-cost asset and the monetary payable used to buy it can follow different translation rules.

Self-check

The US$1,000 invoice relates to machinery carried at historical cost. Do both the machinery and the open payable change at month-end as the rate moves?

Show answer

Retranslate the monetary payable at the closing rate. Keep the historical-cost machinery at its transaction-date translated cost, subject to depreciation and other applicable measurement requirements.

Follow a USD payable through payment

A CAD-functional entity buys inventory for US$10,000 when US$1 equals CAD $1.34. Debit inventory and credit accounts payable for CAD $13,400. At year-end the rate is $1.37. Debit foreign exchange loss and credit payable for $300. The payable is now $13,700.

The company pays in the following period at $1.35. Debit payable $13,700, credit cash $13,500 and credit foreign exchange gain $200. The net loss over both periods is $100. Under the historical-cost assumption, the inventory itself stays at its original CAD cost, subject to its own measurement requirements.

What to check at work

Check whether balances are monetary, confirm the rate direction and keep the transaction, closing and settlement rate sources. Distinguish remeasurement of an individual invoice from translation of a foreign operation, where qualifying translation differences normally go to other comprehensive income.

Try it yourself

Why is there a gain on settlement when the company paid more CAD than it originally booked?

Show answer

Compare settlement with the most recent carrying amount. Payment of $13,500 extinguishes a $13,700 payable, producing a $200 gain after the earlier $300 loss.

IFRS Foundation · Standards Navigator

IAS 36 · Impairment of Assets

Assess relevant impairment indicators. Some assets require mandatory annual testing. Recoverable amount is the higher of value in use and fair value less costs of disposal. Test at cash-generating unit level when independent inflows cannot be determined for the asset.

Scope and indicators

Apply this model to relevant assets such as equipment, goodwill and many intangibles. Inventory and financial assets generally have their own impairment models. Look for adverse market or operating changes, damage, obsolescence and worse-than-expected performance. Test goodwill and indefinite-life or not-yet-available-for-use intangibles annually as well as when indicators arise.

Measure recoverable amount

Use the higher of fair value less costs of disposal and value in use. Value in use discounts future cash flows from continued use and ultimate disposal using assumptions consistent with the asset in its current condition.

Choose the testing level

When an individual asset does not generate largely independent inflows, test the smallest group that does. Allocate goodwill to the relevant cash-generating units or groups for testing. Allocate a group loss to goodwill first and then to the other assets subject to applicable floors.

Record, reverse and disclose

Recognise the loss for carrying amount above recoverable amount. For a cost-model asset it generally goes to profit or loss. Recalculate future depreciation. Reverse eligible losses when the estimates improve, capped at the carrying amount that would have existed without impairment. Never reverse goodwill impairment. Disclose material losses and key assumptions where required.

Worked example

A café machine has a carrying amount of $9,000 and a recoverable amount of $7,500. Recognise a $1,500 impairment, assuming the cost model.

Carrying amount is $9,000. Fair value less disposal costs is $7,200 and value in use is $7,500. The recoverable amount is $7,500. Dr impairment expense and Cr the asset or accumulated impairment $1,500 for this cost-model example.

Application point

Reversal rules differ for goodwill and other assets.

Self-check

A machine has a $12,000 carrying amount. The two recoverable amount estimates are $10,000 and $11,000. Which figure is used and how much is lost?

Show answer

Use the higher estimate, $11,000. The impairment is $1,000.

Measure an impairment and reset depreciation

A machine under the cost model has a $50,000 carrying amount. It generates sufficiently independent cash inflows to test individually. Value in use is $42,000 and fair value less costs of disposal is $40,000. Recoverable amount is $42,000. Debit impairment loss and credit accumulated impairment for $8,000.

With four years remaining and zero residual value, forward straight-line depreciation is $10,500 per year. If new evidence later supports a reversal, cap the carrying amount at what it would have been after depreciation without the impairment. A goodwill impairment cannot be reversed.

What to check at work

Support the impairment trigger, cash flow forecasts and discount rate. If individual cash inflows are not sufficiently independent, identify the relevant cash-generating unit. In a unit with goodwill, allocate an impairment to goodwill first, then generally pro rata to other assets subject to the required floors.

Try it yourself

Why is the loss $8,000 instead of $10,000?

Show answer

Recoverable amount is the higher of the two measures, so compare carrying amount with $42,000.

IFRS Foundation · Standards Navigator

IAS 37 · Provisions and Contingencies

Recognise a provision when a past event creates a present obligation with a probable outflow and a reliable estimate. Measure at the best estimate and discount when material. Contingent liabilities generally require disclosure unless outflow is remote.

Decide what exists at close

A provision is a liability with uncertain timing or amount. Recognise it when a past event has created a present legal or constructive obligation, an outflow is probable, and the amount can be reliably estimated. A constructive obligation can arise from a sufficiently specific practice or communication that creates valid expectations.

Distinguish contingencies

A possible obligation or an unrecognised present obligation is generally disclosed unless the outflow possibility is remote. A contingent asset is disclosed when an inflow is probable and recognised only when the inflow becomes virtually certain.

Measure the provision

Use the best estimate at reporting date. For a population of similar obligations, expected value can combine the outcomes and probabilities. A single obligation may require considering the most likely outcome alongside other possibilities. Discount if the time value of money is material. Review and adjust each reporting period.

Apply to contracts and restructuring

Future operating losses do not create a provision. For an onerous contract, consider the unavoidable cost of fulfilling or exiting it and test the related assets for impairment before recording the provision where applicable. Restructuring needs a sufficiently detailed plan and a valid expectation it will be carried out.

Report and check

For relevant classes, explain movements, nature, expected timing, major uncertainties and expected reimbursements. Keep support for probability and cost assumptions.

Worked example

The café has sold equipment with warranties. If claims across the population are probable, estimate the obligation using the range of outcomes and their likelihoods.

For assurance warranties on 100 units, assume 90% require no work, 8% cost $100 each and 2% cost $500 each. The expected cost is $18 per unit, so the provision is $1,800. Dr warranty expense / Cr warranty provision.

Application point

A plan to spend money next year generally creates no present obligation on its own.

Self-check

Management approves next year’s training budget. No contracts have been signed and no obligation has been communicated. Is there a provision?

Show answer

No. Budget approval alone has not created a present obligation arising from a past event.

Build a warranty provision from claims data

A company sells 1,000 products with assurance-type warranties. It expects 80% of units to need no repair, 15% to need a $100 repair and 5% to need a $300 repair. Assume discounting is immaterial. The expected cost is $30 per unit, or $30,000 in total.

At recognition, debit warranty expense and credit warranty provision for $30,000. When paying $4,000 of qualifying claims, debit the provision and credit cash. The balance before re-estimation is $26,000. Review estimates at each reporting date and use the provision only for the costs it was recognised to cover.

What to check at work

Document the event creating the obligation, the probability assessment and the calculation. A contingent liability is generally disclosed unless the possibility of an outflow is remote. A contingent asset is disclosed when inflow is probable, and an asset is recognised when inflow is virtually certain.

Try it yourself

Can a management budget for next year’s routine maintenance create a provision today?

Show answer

No. A future spending plan alone does not create a present obligation from a past event.

IFRS Foundation · Standards Navigator

IAS 38 · Intangible Assets

Assess identifiability, control and future benefits. Expense research. Capitalise development once all recognition criteria are met, including feasibility and ability to complete and use or sell the asset. Amortise finite-life intangibles and test indefinite-life ones annually for impairment.

Identify the asset

An intangible asset is identifiable, nonmonetary and without physical substance. Identifiability can come from separability or contractual or legal rights. Assess control, probable benefits and whether the cost can be measured reliably.

Separate research from development

Expense research costs. Start capitalising development only once technical feasibility, intention and ability to complete and use or sell, probable future benefits, adequate resources, and reliable cost measurement are all demonstrated. If you cannot distinguish research from development, treat the spending as research.

Measure after recognition

The cost model is common. Revaluation requires an active market, which is unusual for intangibles. Amortise finite-life assets from availability for use over their useful lives and review estimates. Indefinite-life assets are not amortised, but test annually for impairment and reassess whether the life remains indefinite.

Avoid common classification errors

Internally generated goodwill, brands, and similar items are not recognised as assets under this standard. Training and start-up expenses are generally expensed. Costs previously expensed cannot later be capitalised simply because the project now qualifies. Disclose useful lives, methods and changes by class.

Worked example

Early investigation into a new app is research expense. Qualifying development costs incurred after meeting the criteria can be recognised as an intangible.

A project spends $3,000 researching an app, then $12,000 on development after all criteria are met. Assuming the latter costs are directly attributable, expense $3,000 and capitalise $12,000. With three years of use and no residual value, a full year of straight-line amortisation is $4,000 once available for use.

Application point

Past expenses are not reinstated once a project qualifies.

Self-check

The team spent $2,000 before it could show technical feasibility and meets all development criteria the next month. Can the earlier cost be added to the asset?

Show answer

No. Capitalisation begins only once all criteria are demonstrated. Keep the earlier expense in profit or loss.

Track the date a development project qualifies

A company spends $12,000 researching software options. Later, after it demonstrates technical feasibility, intent and ability to complete and use the software, future benefits, adequate resources and reliable cost measurement, it incurs $30,000 of qualifying development payroll and $4,000 of staff training.

Expense the research and training. Capitalise the $30,000 of qualifying development costs from the date all criteria were met. If available for use October 1 with a three-year useful life, zero residual value and straight-line amortisation, record $2,500 of amortisation to December 31. Debit amortisation expense and credit accumulated amortisation.

What to check at work

Record the date each recognition criterion was satisfied and retain time records. Separate direct development time from maintenance and training. Test indefinite-life assets and intangible assets not yet available for use annually for impairment.

Try it yourself

Can the earlier research costs be reinstated when development qualifies?

Show answer

No. Costs already recognised as expenses remain expensed.

IFRS Foundation · Standards Navigator

IFRS 9 · Financial Instruments

Classification of financial assets depends on the business model and cash flow characteristics. Apply expected credit loss requirements to relevant balances. A provision matrix can be used for qualifying trade receivables under the simplified approach, adjusted for current and forward-looking information.

Recognise and classify

Recognise a financial instrument when the entity becomes party to its contractual provisions. Initially measure generally at fair value, plus or minus direct transaction costs for instruments outside fair value through profit or loss. Certain trade receivables are initially measured at the applicable transaction price.

Apply the business-model and cash-flow tests

For debt assets, assess how the portfolio is managed and whether contractual flows are solely payments of principal and interest. Hold-to-collect instruments passing that test generally use amortised cost. A collect-and-sell model with the same cash-flow result generally uses fair value through other comprehensive income. Other debt assets generally use fair value through profit or loss. Equity investments generally use profit or loss, with an irrevocable presentation election for eligible non-trading holdings.

Estimate credit losses

Under the general model, start with 12-month expected losses for relevant assets and move to lifetime losses when credit risk rises significantly. For many trade receivables, the simplified approach uses lifetime expected losses from inception. Use probability-weighted, forward-looking information, not just past loss rates.

Apply to liabilities and risk management

Many financial liabilities subsequently use amortised cost, with exceptions such as derivatives and certain fair-value designations. Assess expiry, transfer of rights and retained risks for asset derecognition, and extinguishment for liabilities. Hedge accounting requires eligible items and instruments, formal designation and documentation, and an economic relationship.

Worked example

If estimated lifetime losses on a $10,000 receivables pool are $600 and an allowance of $200 credit already exists, record $400 more.

A receivables matrix estimates $600 of lifetime expected losses. The ledger already has a $200 credit allowance. Dr impairment loss and Cr loss allowance $400. Carry gross receivables of $10,000 net of the $600 allowance, or $9,400.

Application point

The expected loss model can require an allowance before a customer misses a payment.

Self-check

A bond held to collect contractual amounts has a return linked to an equity index. Can you assume amortised cost because management intends to hold it?

Show answer

No. The hold-to-collect business model is only one test. The equity-linked return may fail the principal-and-interest cash-flow test, in which case the bond generally goes to fair value through profit or loss.

Calculate lifetime losses with a provision matrix

For trade receivables under the simplified approach, assume forward-looking lifetime loss rates of 1% on $40,000 current, 6% on $10,000 past due and 20% on $5,000 seriously past due. The required allowance is $2,000 ($400 + $600 + $1,000).

If the ledger has a $1,250 credit allowance before adjustment, debit impairment loss and credit allowance by $750. Report the $55,000 gross receivable balance net of the $2,000 allowance, or $53,000. A subsequent write-off reduces the gross receivable and uses the allowance to the extent the amount is already provided for.

What to check at work

Reconcile ageing to the general ledger, segment balances by shared credit risk and support adjustments for current and forecast conditions. Avoid counting individually assessed losses again in the matrix. For debt investments, document both the business model and the contractual cash flow test before selecting a measurement category.

Try it yourself

Does a current invoice automatically have a zero lifetime loss rate?

Show answer

No. Payments can default later, so current invoices can still carry an expected loss.

IFRS Foundation · Standards Navigator

IFRS 15 · Revenue from Contracts with Customers

Identify the contract and distinct obligations. Determine the transaction price, allocate it to obligations using relative stand-alone selling prices as a general rule, and recognise revenue when or as control transfers.

Step 1: identify a contract

Check that the parties approved the arrangement, rights and payment terms are identifiable, there is commercial substance, and collection of consideration the entity expects to be entitled to is probable. Evaluate contract changes based on whether added goods or services are distinct and how the price is set.

Steps 2 and 3: promises and price

Identify distinct goods or services that can benefit the customer and are separately identifiable in the contract. Determine expected consideration. Estimate variable consideration and include only amounts for which a significant reversal is highly unlikely when uncertainty is resolved. Consider financing and noncash consideration where relevant.

Step 4: allocate

Allocate on relative stand-alone selling prices in the usual case. Estimate missing stand-alone prices from available evidence. Some discounts and variable amounts can be allocated specifically when the criteria support doing so.

Step 5: recognise on transfer

Recognise over time when the customer receives benefits as work occurs, controls the asset as it is created, or the asset has no alternative use and there is an enforceable right to payment for work to date. Otherwise recognise at the point control transfers. For over-time obligations, use an appropriate measure of progress.

Track contract balances and disclosures

An advance normally creates a contract liability. An unconditional right to payment is a receivable. A right conditional on more than passage of time is a contract asset. Explain revenue categories, contract balance changes, performance obligations and significant judgements where required.

Worked example

A customer pays $450 upfront for one catering service satisfied on delivery. Record a contract liability on receipt. On delivery debit the liability and credit revenue for $450.

For the $450 catering advance, Dr Cash and Cr Contract liability $450 on receipt. On delivery, Dr Contract liability and Cr Catering revenue $450. If one package instead includes two distinct services with stand-alone prices of $300 and $200 for a $450 bundle, the usual allocation is $270 and $180.

Application point

Look separately at billing, collection and satisfaction of the obligation.

Self-check

For that $450 bundle, the $300 stand-alone service has been delivered and the other service is still owed. What revenue is recognised so far if the customer has paid in full?

Show answer

Recognise $270 (60% of $450). Leave $180 in the contract liability until the second distinct service is delivered, assuming the usual relative-price allocation applies.

Allocate a bundle and release deferred revenue

A customer prepays $900 for a machine and three months of support. Assume both promises are distinct. The standalone selling prices are $800 and $200, respectively. Allocate $720 to the machine and $180 to support using the 80:20 ratio. Assume the support is provided evenly over the three months.

On receipt, debit cash and credit contract liability $900. When control of the machine transfers, debit contract liability and credit sales revenue $720. Recognise $60 of support revenue per month by debiting the remaining contract liability. After the first support month, total recognised revenue is $780 and the remaining liability is $120.

What to check at work

Keep the contract, standalone price support and evidence of delivery or progress. Check whether discounts or variable amounts meet the criteria for specific allocation. Consider returns, variable consideration and modifications separately as applicable.

Try it yourself

If an entity has performed but payment is conditional on another milestone, is the right a receivable?

Show answer

Generally it is a contract asset until the right is unconditional, at which point it becomes a receivable.

IFRS Foundation · Standards Navigator

IFRS 16 · Leases

A lease gives a customer control of the use of an identified asset for a period in exchange for consideration. A lessee generally recognises a right-of-use asset and a lease liability, with exemptions available for qualifying short-term or low-value leases. The liability is initially measured at the present value of relevant payments.

Identify a lease

Assess whether there is an identified asset and the customer both obtains substantially all the economic benefits from use and directs that use throughout the period. A supplier’s substantive substitution right can mean there is no identified asset. Distinguish lease and service components where required.

Set term and measure at commencement

Include the noncancellable period and relevant extension or termination options when exercise or non-exercise is reasonably certain. Discount relevant unpaid payments at the rate implicit in the lease if readily determinable, otherwise use the lessee’s incremental borrowing rate. Adjust the initial right-of-use asset for prepayments, incentives, qualifying direct costs and restoration obligations as applicable.

Account after commencement

Accrue interest on the liability and reduce it by payments. Depreciate the asset and assess impairment. Remeasure when specified assumptions change and evaluate modifications separately. For eligible short-term or low-value leases, an elected exemption can allow expense recognition instead.

Lessor presentation and disclosures

Lessors generally classify leases as finance or operating based on whether substantially all ownership risks and rewards transfer. Identify the disclosures needed for the scale, timing and uncertainty of lease cash flows. Reconcile the schedule to the ledger and support term and discount-rate estimates.

Worked example

If lease payments have an initial present value of $24,000 and there are no other initial adjustments, record a $24,000 asset and liability. Subsequent payments, interest and depreciation have distinct effects.

Assume initial asset and liability of $24,000, a four-year lease, no ownership transfer, straight-line depreciation, annual interest of 5% in year one and an end-of-year payment of $6,800. Record $6,000 depreciation and $1,200 interest. The first payment reduces principal by $5,600, leaving $18,400.

Application point

Check lease term and discount rate assumptions before building the schedule.

Self-check

Why is the first $6,800 payment not all interest expense?

Show answer

Only $1,200 is the financing cost for the year under the stated assumptions. The remaining $5,600 repays the recorded liability. Depreciation of the right-of-use asset is a separate entry.

Work through a two-year lessee schedule

A non-exempt two-year lease has two year-end payments of $11,025. At 5%, their present value is $20,500. Assume no initial direct costs, incentives, prepayments, restoration obligation or transfer of ownership. Debit right-of-use asset and credit lease liability $20,500 at commencement.

Year one interest is $1,025. Debit interest expense $1,025 and lease liability $10,000, and credit cash $11,025. The liability closes at $10,500. In year two, debit interest expense $525 and the remaining liability $10,500, and credit cash $11,025. Record straight-line depreciation of $10,250 each year on the asset.

What to check at work

Tie payment dates to the contract and document the discount rate and lease term, including options when exercise or non-exercise is reasonably certain. Check separately for reassessments and modifications. Reconcile the closing liability to the ledger.

Try it yourself

How much of the first cash payment reduces principal?

Show answer

$10,000. The other $1,025 is interest.

IFRS Foundation · Standards Navigator

IFRS 18 · Presentation and Disclosure in Financial Statements

Replaces IAS 1 for annual periods beginning on or after January 1, 2027, with earlier application permitted. Introduces defined profit or loss subtotals, disclosures for qualifying management-defined performance measures, and aggregation and disaggregation requirements.

Effective date and scope

IFRS 18 replaces IAS 1 for annual reporting periods beginning on or after January 1, 2027, with earlier application permitted. Apply the relevant transition requirements and plan comparative information and reconciliations when preparing for adoption.

Classify income and expenses

Use operating, investing, financing, income taxes and discontinued operations categories. Operating is the residual category. The treatment of some investing or financing items differs for entities whose main business includes investing in assets or providing financing to customers.

Present comparable subtotals

Present operating profit or loss, and profit or loss before financing and income taxes when applicable. Use the defined categories before comparing entities or building internal reporting from the statement.

Explain management measures

A qualifying management-defined performance measure is a subtotal of income and expenses used in public communications outside the statements to convey management’s view of entity-wide performance, subject to exclusions. Present the required explanations and reconciliation to a comparable specified subtotal in one note, including related tax and non-controlling-interest effects where required.

Aggregate and label clearly

Group items with shared characteristics and disaggregate when material information would otherwise be obscured. The primary statements provide structured summaries. Use notes for material detail and explain sufficiently what is included in broad labels.

Worked example

A reporting team maps the ledger to the new income statement categories and assesses whether publicly communicated adjusted profit measures require note disclosure.

In the café series, operating income is $3,000. Assuming the $500 interest expense belongs in financing for this café and there are no investing items, profit before financing and income taxes is $3,000. After $500 interest and $500 tax, net income is $2,000.

Application point

Check transition rules and use the edition applicable to the reporting period.

Self-check

A company publishes an adjusted profit subtotal in investor materials. What should the reporting team check before preparing the notes?

Show answer

Check whether it meets the definition of a management-defined performance measure and whether an exclusion applies. For a qualifying measure, explain what it represents and reconcile it to the comparable specified subtotal with the required effects and disclosures.

Map a reporting package and reconcile an adjusted subtotal

Assume a manufacturer with no specified main business activity has revenue of $120,000 and operating expenses of $95,000, including $1,000 of restructuring expense. Its operating profit is $25,000. Assume $2,000 of investment income goes to investing, $4,000 of loan interest expense to financing and $5,000 of tax to income taxes. Profit before financing and income taxes is $27,000 and net profit is $18,000.

If the manufacturer publicly communicates adjusted operating profit of $26,000 and that subtotal qualifies as a management-defined performance measure, reconcile it to operating profit of $25,000 by showing the $1,000 restructuring adjustment. The note also explains why management uses the measure, how it is calculated, and the related tax and non-controlling-interest effects as applicable.

What to check at work

For periods beginning on or after January 1, 2027, apply IFRS 18 unless already adopted early. Plan retrospective application, map the comparative income statement and prepare the required transition reconciliation. Review the consequential IAS 7 changes before finalising the cash flow statement.

Try it yourself

Where does the restructuring expense go in the manufacturer’s IFRS 18 operating profit if it is operating in nature?

Show answer

Include it in operating expenses. The separate adjusted subtotal may add it back for the management measure reconciliation.

IFRS Foundation · Standards Navigator

About the tutor

Ijaz Ali is an ACCA-qualified Senior Accountant with over 10 years of experience in financial reporting, month-end close and SAP FICO. He is a former SAP FICO instructor and runs The Accounting Nest YouTube channel.

Watch on YouTube